angle displacement meaning in Chinese
角位移
角移
Examples
- The necessity of angle displacement error control is also explained
本文方法具有一般性，对类似工程有借鉴意义。 - Angle displacement measurement
角位移测量 - In the simulation it was found that there was interference when the manipulator moved . it is because the manipulator is controlled by minimum time method . the method has no constraints about angle displacement
经分析后发现主要是由于采用的控制方法是最小时间控制，造成了机械手各关节的角位移太大，从而产生了干涉。 - As an electromechanical element , which can transform digital electrical pulse signal into mechanical angle displacement , the stepper motor takes the advantage that it can work well in the open loop system , and is widely used in different kinds of control system
作为一种将数字式脉冲信号转换成机械角位移的机电执行元件，步进电机的主要优点是能在开环系统中较好地工作，因此，它作为驱动元件广泛地应用于各种控制系统中。 - Considering joint clearances at both ends of the coupler , a continuous contact model is developed by modeling clearance as a massless rigid link . a set of strongly nonlinear equations is obtained by using angle displacement of clearances in kinematic pairs as generalized coordinates . four order rong - kutta method is adopted to solve the dynamical equations of continuous contact model
考虑曲柄与连杆、连杆与滑块之间运动副间隙，将运动副间隙看成是一无质量的理想杆，利用连续接触模型进行建模，采用运动副间隙角作为广义坐标，得出一组强非线性方程组。